2. Squeeze a long thick bead of Oasis paint across the top of the tree trunk on the stencil. Using your squeegee at a forty-five degree angle and even pressure, pull a thin coat of paint down the stencil until the entire design is covered.

3. Peel the stencil to reveal your design. Wash the stencil with cold water. Don’t scrub the sticky side. Once the stencil is dry, replace onto the backing sheet.

4. Allow the design to dry for twenty four hours. Heat set with an iron, no steam, cotton setting. Use a pressing cloth. Iron for thirty seconds.

5. Add rhinestones to the design by attaching them with gem glue.